Toshiba XL975 - Manual (Page 37)

37
CONTROLS AND FEATURES
Engl
ish Picture controls
Most of the picture controls and functions are
available in both digital and analogue modes.
PLEASE NOTE: Features not available will be grayed
out.
This television offers the choice of personalising the picture style.
AutoView, Dynamic, Standard, Hollywood 1, Hollywood 2,
Store, Game and PC are preset options and affect many
features/settings within the television.
NOTE:
• Because the AutoView mode automatically adjusts picture
settings based on ambient light conditions and input signal
content, the Auto Brightness Sensor menu is grayed out
when it is selected.
• Store mode is only available when Location is set to Store.
• Game mode is available in external input mode (other than
aerial input). When you select Game mode, suitable
widescreen formats will be selected.
• PC mode is available in RGB/PC input mode or HDMI input
mode.
a
Press MENU /
C c
to highlight Setup icon.
b
Press B / C c to highlight Picture icon and press OK.
c
Press
B
or
b
to select Picture Mode.
d
Press C or c to select the picture mode you prefer
and press OK.
NOTE: The picture mode you select affects the current input
only. You can select a different picture mode for each input.
You can customize current picture mode settings as desired. For
example, while selecting “Dynamic”, if you change the following
items, such as Backlight, Contrast, Brightness, Colour, Tint,
Sharpness and the Advanced Picture Settings items, your
new settings are saved for “Dynamic” picture mode.
a
In the Picture menu, press B or b to select either
Backlight, Contrast, Brightness, Colour, Tint or
Sharpness and press OK.
b
Press C or c to adjust the settings.
This feature resets all picture settings to the factory settings
except Picture Mode.
a
In the Picture menu, press
B
or
b
to select Reset and
press OK.
b
A confirmation message will appear. Press
C
or
c
to
select Yes and press OK.
When ColourMaster is set to On, it allows the ‘Base Colour
Adjustment’ feature to become available.
a
In the Picture menu, press
B
or
b
to select
Advanced Picture Settings and press OK.
b
Press
b
to select ColourMaster.
c
Press C or c to select On or Off and press OK.
Picture Mode
Picture
Picture Mode
Reset
Backlight
Colour
Tint
Sharpness
100
100
0
0
0
0
Standard
Contrast
Brightness
Picture preferences
Reset
ColourMaster
Advanced Picture Settings
ColourMaster
Base Colour Adjustment
Colour Temperature
Noise Reduction
Active Vision
Off
Off
Low
Auto Brightness Sensor
Active Backlight Control
Middle
High
Black/White Level