Dialing properties, Connecting the modular cable – Toshiba Portege A600 User Manual

Page 118

Advertising
background image

User’s Manual

4-35

Operating Basics

Dialing Properties

You should select this item in order to display the dialing properties.

Connecting the modular cable

To connect the modem's modular cable, follow the steps as detailed below:

1. Plug the end of the modular cable into the computer's modem jack.
2. Plug the other end of the modular cable into a telephone jack.

Connecting the internal modem (PORTÉGÉ A600)

If you are using the computer in Japan, the Telecommunications Business

Law requires that you select Japan region mode. It is illegal to use the

modem in Japan with any other selection.

Connection to any communication line other than an analog phone line

could cause a computer system failure.

Connect the built-in modem only to ordinary analog phone lines.

Never connect the built-in modem to a digital line (ISDN).

Never connect the built-in modem to the digital connector on a

public telephone or to a digital private branch exchange (PBX).

Never connect the built-in modem to a key telephone system for

residences or offices.

Avoid using your computer modem with the telephone cable

connected during an electrical storm. There may be a remote risk of

electric shock from lightning.

Modular cable

Modem jack

Telephone jack

Do not pull on the cable or move the computer while the cable is

connected.

Advertising
This manual is related to the following products: