Toshiba Portege A600 User Manual

Page 172

Advertising
background image

User’s Manual

8-16

Troubleshooting

Some external devices may not be able to use

the "USB Sleep and Charge function". In this

case, please try one or more of the following

methods.

Select another Mode.

Turn OFF the computer while external

devices are connected.

Connect external devices after turning OFF of

the computer.

If this function can not be still used, change the

setting to [Disabled] and stop using this function.

The battery depletes

quickly even when I

turned OFF the power

of the computer.

When "USB Sleep and Charge function" is set to

[Enabled], USB bus power (DC5V) will be

supplied to the external device connected to the

compatible port. If external device is connected

to the compatible port when the AC adaptor is

not connected to the computer, the battery of the

computer will be depleted even when the power

of the computer is turned OFF.
Connect the AC adaptor to the computer or

change the "USB Sleep and Charge function"

setting to [Disabled] or if there is a USB port that

does not have the USB Sleep and Charge

function-compatible icon (

), use that port.

External devices

connected to the

compatible ports do not

work when connected

to a compatible port.

Some external devices may not work when

connected to a compatible port when the "USB

Sleep and Charge function" is [Enabled].
Reconnect the external device after turning ON

the computer.
If the external device still does not work, connect

device to a USB port, if there is one, that does

not have the USB Sleep and Charge function-

compatible icon (

) or change the "USB Sleep

and Charge function" setting to [Disabled].

The "USB Wakeup

function" does not work.

When "USB Sleep and Charge function" is set to

[Enabled], the "USB Wakeup function" does not

work for ports that support the USB Sleep and

Charge function.
In that case, use a USB port, if there is one, that

does not have the USB Sleep and Charge

function-compatible icon (

) or change the

"USB Sleep and Charge function" setting to

[Disabled].

Problem

Procedure

Advertising
This manual is related to the following products: