Wireless communications, Wireless communications -36, Disconnecting the modular cable – Toshiba Portege A600 User Manual

Page 119: Wireless lan

Advertising
background image

User’s Manual

4-36

Operating Basics

Disconnecting the modular cable

To disconnect the modular cable, follow the steps as detailed below:
1. Pinch the lever on the plug in the telephone jack and pull it out from

within the connector.

2. Pinch the lever on the plug in the computer's modem jack and pull it out

from within the computer.

Wireless communications

The computer’s wireless communication function supports some wireless

communication devices.
Only some models are equipped with both Wireless LAN and Bluetooth

functions.

Wireless LAN

The Wireless LAN is compatible with other LAN systems based on Direct

Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing

radio technology that complies with the IEEE802.11 Wireless LAN

standard.

Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a

microwave oven or in areas subject to radio interference or magnetic

fields. Interference from a microwave oven or other source can disrupt

Wi-Fi or Bluetooth operation.

Turn all wireless functionalities off when near a person who may have

a cardiac pacemaker implant or other medical electric device. Radio

waves may affect pacemaker or medical device operation, possibly

resulting in serious injury. Follow the instruction of your medical device

when using any wireless functionality.

Always turn off wireless functionality if the computer is near automatic

control equipment or appliances such as automatic doors or fire

detectors. Radio waves can cause malfunction of such equipment,

possibly resulting in serious injury.

It may not be possible to make a network connection to a specified

network name using the ad hoc network function. If this occurs, the

new network (*) will have to be configured for all computers connected

to the same network in order to re-enable network connections.

* Please be sure to use new network name.

Do not install or remove a memory module while Wake-up on Wireless

LAN is enabled.

Advertising
This manual is related to the following products: