Toshiba M5 - Manual (Page 74)

4-12 User’s Manual
Operating Basics
Inserting a module
Insert the Slim Select Bay HDD adaptor as described below.
1. Insert the Slim Select Bay HDD adaptor in the computer as shown
below and press until the ejector clicks.
2. If you want to lock the Slim Select Bay HDD adaptor, set the Slim Select
Bay lock screw in the hole for the lock position. The lock screw is
inserted in the unlock position at the time of purchasing.
Inserting the Slim Select Bay HDD adaptor
Using optic al disk drives
The full-size drive provides high-performance execution of
CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is
used for CD/DVD-ROM operation. When the computer is accessing a
CD/DVD-ROM, an indicator on the drive glows and the Slim Select Bay
indicator glows.
If you have a DVD-ROM&CD-R/RW drive, refer also to the Writing CDs on
DVD-ROM&CD-R/RW drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs/DVDs.
Slim Select Bay HDD adaptor
Lock screw
Use the WinDVD application to view DVD-Video discs.
When the power of the optical disk drive is off, pressing the Fn + Tab keys
will turn the power of the optical disk drive on. Furthermore, it is possible to
set it to turn the power of the optical disk drive on and eject the tray at the
same time.