Writing cd/dvds on dvd super multi drive, Writing cd/dvds on dvd super multi drive -18, Writing cd/dvds on – Toshiba M5 User Manual

Page 80: Dvd super multi drive, Important message

Advertising
background image

4-18

User’s Manual

Operating Basics

Writing CD/DVDs on DVD Super Multi drive

You can use the DVD Super Multi drive to write data to either CD-R/RW or

DVD-R/-R DL/-RW/+R/+R DL/+RW/-RAM discs. The following applications

for writing are provided: RecordNow!, and DLA licensed by Sonic

Solutions, and InterVideo’s WinDVD Creator Platinum.

Important message

Before you write or rewrite to CD-R/RW or DVD-R/-R DL/-RW/+R/+R DL/

+RW/-RAM discs, read and follow all setup and operating instructions in

this section. If you fail to do so, the DVD Super Multi drive may not function

properly, and you may fail to write or rewrite, loose data or incur other

damage.

Legal Footnotes

TOSHIBA does not bear responsibility for the following:

Damage to any CD-R/RW or DVD-R/-R DL/-RW/+R/+R DL/+RW/-RAM

disc that may be caused by writing or rewriting with this product.

Any change or loss of the recorded contents of CD-R/RW or

DVD-R/-R DL/-RW/+R/+R DL/+RW/-RAM disc that may be caused by

writing or rewriting with this product, or for any business profit loss or

business interruption that may be caused by the change or loss of the

recorded contents.

Damage that may be caused by using third party equipment or

software.

Given the technological limitations of current optical disc writing drives, you

may experience unexpected writing or rewriting errors due to disc quality or

problems with hardware devices. Also, it is a good idea to make two or

more copies of important data, in case of undesired change or loss of the

recorded contents.

Refer to the

Writable discs

, Chapter 2 for the details about the types of

writable CD/DVD discs.

Do not turn off the power of the optical disk drive while the computer is

accessing the drive. If you turn off the power, you may lose data.

When the power of the optical disk drive is off, the disc tray will not

open even if the eject button is pushed.

When writing to media using an optical drive, always connect the AC

adaptor to a power plug socket. If data is written while powered by the

battery pack, writing may sometimes fail due to low battery power and data

loss may occur.

Advertising
This manual is related to the following products: