Toshiba Equium M40X - Manual (Page 38)

1-12 User’s Manual
Introduction
Utilities
This section describes preinstalled utilities and tells how to start them.
For details on operations, refer to each utility's online manual, help files or
readme files.
Standby In Standby mode, power to the system remains
on, but the CPU and all other devices are in
sleep mode. When the computer is in standby
mode, the Power LED flashes in amber. The
computer enters Standby mode regardless of the
Hibernate setting. Refer to the Turning off the
power section in Chapter 3, Getting Started, for
details.
■ Before entering Standby mode, be sure to save your data.
■ Do not install or remove a memory module while the computer is in
Standby mode. The computer or the module could be damaged.
■ Do not remove the battery pack while the computer is in Standby mode.
Data in memory will be lost.
TOSHIBA Power
Saver
There are two ways to display the Windows ® XP
Control Panel. The default is Category View.
TOSHIBA Power Saver is under the
Performance and Maintenance item.
TOSHIBA Assist TOSHIBA Assist is a graphical user interface that
provides easy access to help and services.
TOSHIBA PC
Diagnostic Tool
TOSHIBA PC Diagnostic Tool displays the basic
information on PC, and the test of built-in devices
can also be performed.
You can boot TOSHIBA PC Diagnostic Tool from
the menu bar. As follows
startAll ProgramsTOSHIBAUtilities
PC Diagnostic Tool