Toshiba Equium M40X - Manual (Page 43)

User’s Manual 2-1
TOSHIBA M40X Series
Chapter 2
The Grand Tour
This chapter identifies the various components of your computer.
Become familiar with each component before you operate the computer.
Front with the display closed
The following figure shows the computer front with its display panel in the
closed position.
Front of the computer with display closed
Certain types of notebook chassis are designed to accommodate all
possible configurations for an entire product series. Your selected model
may not have all the features and specifications corresponding to all of the
icons or switches shown on the notebook chassis, unless you have
selected all those features.
1
2
3 1. DC IN LED
2. Power LED
3. Battery LED
DC IN LED The DC IN LED indicates the computer is
connected to the AC adapter and it is plugged
into an AC power source.
Power LED The Power LED flashes amber while the system
is in Standby mode. The LED turns off when the
computer is turned off or in hibernation mode. In
normal operating mode, the LED is green.
Battery LED The Battery LED indicates the battery's current
charge/discharge status. It lights green when the
battery is fully charged. It lights amber while the
battery is being charged from the AC adapter. It
flashes amber when the battery capacity is low.