Security, Wireless communication switch, Wireless communication led – Toshiba Equium M40X User Manual

Page 75: Using optical disc drives, Using optical disc drives -7

Advertising
background image

User’s Manual

4-7

Operating Basics

Security

1. Be sure to enable WEP(encryption) function. Otherwise your computer

could be left wide open to illicit access via the Wireless LAN and may

result in an intrusion leading to the theft or even loss of stored data,

among other things. Moreover, the owner of an Internet connection is

responsible for all browsing, downloading, and uploading activities on

said connection; an unsecure Wireless network connected directly to

the Internet is an open invitation for outsiders to abuse your ISP

account privaleges. Therefore, TOSHIBA strongly recommends that

you enable the WEP function.

2. TOSHIBA is not liable for data packet theft due to the use of the

Wireless LAN, and any damage thereof.

Wireless communication switch

You can enable or disable wireless LAN function, with the on/off switch.

No transmissions are sent or received when the switch is off. Slide the

switch forward to turn it on and backward to turn it off.

Wireless communication LED

The LED indicates the status of the wireless communication functions.

Using optical disc drives

The illustrations in this section might differ slightly from your drive, but

operation is the same for all optical disc drives. The full-size drive provides

high-performance execution of disc-based programs. You can run either

12 cm (4.72") or 8 cm (3.15") discs without an adapter. An ATAPI interface

controller is used for disc drive operation. When the computer is accessing

a disc, an indicator on the drive illuminates.

If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on

CD-RW/DVD-ROM drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on

DVD Super Multi drive section for precautions on writing to CDs.

Turn the switch off in airplanes and hospitals. Check the LED.

It stops glowing when the wireless communication function is off.

LED status

Indication

LED off

Wireless communication switch is set to off

LED glows

Wireless communication switch is on

Use the WinDVD application to view DVD-Video discs.

Advertising
This manual is related to the following products: