Toshiba Libretto W100 - Manual (Page 75)

User’s Manual 5-9
Power and Power-Up Modes
Installing the battery pack
To install a battery pack, follow the steps as detailed below:
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place and the battery lock (2)
is in its lock position.
Securing the battery pack
3. Turn your computer over.
Power-up modes
The computer has three different power-up modes as follows:
■ Shut Down Mode: The computer will shut down without saving data - in
view of this you must always save your work before you turn the
computer off.
■ Hibernation Mode: Data in memory will be saved to the solid state drive.
■ Sleep Mode: Data will be maintained in the computer's memory.
Windows utilities
You can configure various settings associated with both Sleep Mode and
Hibernation Mode within the Power Options (to access it, Start  Control
Panel  System and Security  Power Options).
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1. Battery pack 2. Battery lock
2
1
11
22
Please refer to the sections Turning on the power and Turning off the
power in Chapter 1, Getting Started for further information.