Toshiba Libretto W100 - Manual (Page 78)

User’s Manual 6-2
HW Setup
Password
This option allows you to set or reset the user password for power on.
User Password
Let you register a new password or change/remove an existing password.
To enter a user password:
1. Select Registered to display the following prompt:
Enter Password:
Enter a password of up to 10 characters. Valid characters for the password
are 1 through 9 (numeric characters). The character string you enter is
displayed as a string of asterisk.
2. Tap OK. The following message appears, allowing you to verify the
password.
Verify Password:
3. If character strings match, the password is registered. Tap OK. If they
do not match, the following message appears. You must repeat from
step 1.
Entry Error!!!
To delete a user password:
1. Select Not Registered to display the following prompt:
Enter Password:
2. Enter the currently registered password. The character string you enter
is displayed as a string of asterisks.
3. Tap OK. If the character string you enter matches the registered
password, the password option is reset and the display changes to:
Not registered
If they do not match, the following message appears. You must repeat from
step 1.
Incorrect Password.
Not Registered Changes or remove the password. (Default)
Registered
Selects the password. A dialogue box will appear
to allow you to set the password.