Toshiba Satellite L505 - Manual (Page 149)

User’s Manual 9-13
L500/L505/L500D/L505D
Pointing device
If you are using a USB mouse, you should also refer to both the USB
device section in this chapter, and the documentation supplied with your
mouse.
Touch Pad
Problem Procedure
On-screen pointer
does not respond to
pointing device
operation In this instance the system might be busy - Try
moving the mouse again after waiting a short while.
Check to make sure that the touch pad button
above is not disabled. Press it so that the light
indicator actives on the touch pad.
Double-tapping does
not work In this instance, you should initially try changing the
double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse
icon.
2. Within the Mouse Properties window, click the
Buttons tab.
3. Set the double-click speed as required and
click OK.
The mouse pointer
moves too fast or too
slow In this instance, you should initially try changing the
speed setting within the Mouse Control utility.
1. To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse
icon.
2. Within the Mouse Properties window, click the
Pointer Options tab.
3. Set the pointer speed as required and click OK.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
The reaction of
Touch Pad is either
too sensitive or not
sensitive enough. Adjust the touch Sensitivity.
1. Click Start -> Control Panel -> Hardware and
Sound -> Mouse icon.
2. Within the Mouse Properties window, click the
Device Settings tab.
3. Click the Settings button.
4. Properties for Synaptics TouchPad Vx.x on
PS/2 Port window is displayed.
5. Select Sensitivity from the Select an item list.
6. Select Touch Sensitivity and move the slider
bar to adjust the sensitivity.
7. Click the OK button.