Toshiba AT100 - Manual (Page 64)

User’s Manual 6-8
TOSHIBA AT100
Mini USB port
This tablet is equipped with a mini USB port that enables you to connect to
a computer.
To connect to a computer:
1. Plug the Mini USB connector of a USB cable (optional) into the Mini
USB port on the tablet.
2. Plug the other end of the USB cable into the USB port on the computer.
Then this tablet becomes a removable MTP (Media Transfer Protocol)
device and you can access its content from the computer.
To remove the tablet from the computer:
1. Make sure all file operations are finished.
2. Unplug the tablet from your computer.
Optional devices
Optional devices can expand your tablet’s capabilities and its versatility.
This section describes the connection or installation of the following
devices:
Cards
■
Memory media slot
■
Secure Digital™ (SD) Card (SD memory card, SDHC memory card,
SDXC memory card, miniSD Card, microSD Card)
■
MultiMediaCard
■
SIM card slot
Peripheral devices
■
USB device
■
HDMI device
■
TOSHIBA Tablet USB Cradle
■
Make sure the connector is properly aligned with the socket. Do not try
to force the connection, doing so can damage the connecting pins.
■
The mini USB port only supports slave mode.