Toshiba AT100 - Manual (Page 76)

User’s Manual 7-2
TOSHIBA AT100
■
Check all cables to ensure they are correctly and firmly attached to the
tablet - loose cables can cause signal errors.
■
Inspect all connecting cables for loose wires and all connectors for
loose pins.
Always try to make detailed notes of your observations and keep them in a
permanent error log - this will help you to describe your problems to your
reseller, dealer or service provider. In addition, if a problem recurs, the log
you have made will help to identify the problem faster.
Hardware and system checklist
This section discusses problems caused by your tablet’s hardware or
attached peripherals. Basic problems may occur in the following areas:
Internal display panel
Apparent tablet’s display panel problems may be related to the tablet’s
setup and configuration.
■
Internal display panel
■
Memory Card
■
USB device
■
Sound system
■
External monitor
■
Wireless LAN
■
Bluetooth
Problem Procedure
Markings appear on
the tablet’s display
panel These marks may have come from contact with
the touch screen. You should try to remove the
marks by gently wiping the display panel with a
clean dry cloth or, if this fails, with a good quality
LCD screen cleaner. In this latter instance you
should always follow the instructions with the
screen cleaner and always ensure you let the
display panel dry properly before closing it.
Problems above
remain unresolved or
other problems occur You should initially refer to the documentation
supplied to you with the software to understand
the cause of the problem.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.