Toshiba RDXV49 - Manual (Page 62)

62 EN
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
Press [DVD] first.
1
Follow the steps 1 to 3 in “Editing Title Name”
on page 60.
2
Select “Hide Chapter” using [K
\ L], then press
[ENTER \OK].
3
Use [SKIP H
\ G], [PLAY B] and [PAUSE F]
to decide the chapter to be hidden.
4
Select “Hidden” using [K
\ L], then press
[ENTER \OK].
5
Press [RETURN] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
If you want hidden chapters to be “Visible”, select the
chapter to be shown. Then use [K
\ L] to select
“Visible” at the step 4 on this page.
Data will be written onto the disc momentarily.
Note
• “Hidden” will be displayed in the preview window while
previewing the hidden chapter.
• When you make all chapters in the title “Hidden”, “Hidden” is
displayed in a thumbnail of the title list.
To prevent the accidental editing or erasing of the titles, you
can protect them in the Original menu.
If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.
1
Follow the steps 1 to 3 in “Editing Title Name”
on page 60.
2
Select “Protect” using [K \ L], then press
[ENTER \OK].
3
Press [ENTER
\OK] again.
For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.
• If the title is already protected, “ON
A OFF” will appear
instead. Press [ENTER \OK], to release the title from
protection.
• The protected title will be marked with icon.
4
Press [RETURN] repeatedly to exit.
For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.
To protect a whole disc
(VR mode DVD-RW and DVD+RW/+R discs only):
Select “Disc Protect OFF
A ON” from “DVD Menu”, then
select “Yes”. Refer to “Setting a Disc to Protect” on
page 45.
You can divide a title into two new titles.
If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.
1
Follow steps 1 to 3 in “Editing Title Name” on
page 60.
2
Use [SKIP H \ G], [REV E], [FWD D],
[PLAY B] and [PAUSE F] to find where you
want to divide the title.
3
Select “Title Dividing” using [K
\ L], then press
[ENTER \OK].
4
Select “Yes” using [K
\ L], then press
[ENTER \OK].
The title is divided into two new titles with the same title
names.
5
Press [RETURN] to exit.
For DVD, writing onto the disc starts.
It may take awhile to write the data on a disc.
Note
• You cannot divide a title of the disc when the number of
recording titles reaches the maximum of 600 (HDD), 99
(-RW) or 49 (+RW), or the number of recording chapters
reaches the maximum of 999 (-RW) or 254 (+RW).
• If there is not enough recordable space left in HDD, you
cannot divide a title of the HDD Original.
Hiding Chapters
Protecting Titles
DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
HDD HDD HDD
Original
DVD-RW DVD-RW DVD-RW
VR
Original
Dividing a Title
For DVD+RW : Writing onto the disc starts. It may take
awhile to write the data on a disc.
For HDD and VR mode DVD-RW disc
: Proceed to step 5 .
HDD HDD HDD DVD-RW DVD-RW DVD-RW
VR
Playlist
DVD+RW DVD+RW DVD+RW
E3TK0FD_EN.book Page 62 Monday, March 9, 2009 10:00 AM