Toshiba RDXV49 - Manual (Page 70)

70 EN
Note
• An individual picture on TV screen is called as Frame,
which consists of two separate images called as Field.
Some pictures may be blurred at the “Auto” setting in still
mode due to their data characteristics.
Assign [VARIABLE SKIP] or [VARIABLE REPLAY] to
skip or rewind by a certain amount of time when they are
pressed.
Refer to the explanations below and set the selected item.
A: Variable Skip (Default: 30 seconds)
Sets the amount of skip time for [VARIABLE SKIP].
B: Variable Replay (Default: 30 seconds)
Sets the amount of rewind time for [VARIABLE REPLAY].
Note
• With discs recorded using the PAL system, a PAL signal
is output for viewing on a PAL system TV.
• Discs recorded with the PAL system cannot be viewed
on an NTSC system TV.
• With discs recorded using the NTSC system, an NTSC
signal is output for viewing on an NTSC or Multi system
TV.
• With discs recorded using the NTSC system, select PAL
to view on a PAL system TV.
Setup A General Setting A Display
Set the OSD language.
Set the screen saver time delay.
Set the front panel display brightness.
• If “Auto” is selected, the brightness of the front panel
display is dark while the power is off.
• If “OFF” is selected, you can lower the power
consumption while the power is off. The brightness of
the front panel display is dark while the power is on, and
the front panel display is off while the power is off.
Note
• If you set “FL Dimmer” to “OFF”, output of the picture
from the external device through AV2 to AV1 (input of
the picture from AV2 and output of the picture from AV1)
is not available when this unit is off.
G Still Mode (Default: Auto) (DVD only)
Auto : Automatically select the best resolution setting
(“Frame” or “Field”) based on the data
characteristics of the pictures.
Field : Select “Field” when the pictures are still
unstable even if “Auto” is selected. “Field”
stabilises the pictures, although the picture
quality may become coarse due to the limited
amount of data.
Frame : Select “Frame” to display relatively motionless
pictures in higher resolution. “Frame” improves
the picture quality, although it may unstabilise
the pictures due to simultaneous output of two
Field data.
H Variable Skip/Replay
I TV System (Default: PAL) (DVD only)
PAL : Outputs a modified PAL signal for viewing discs
recorded with the NTSC system on a PAL system
TV.
Auto : Changes the video system (PAL / NTSC)
automatically according to the format of the
inserted disc.
Still Mode
Auto
Field
Frame
A
B
Variable Skip
Variable Replay
Variable Skip/Replay
Variable Skip
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
Variable Replay
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
TV System
PAL
Auto
Display
A OSD Language (Default: Français)
B Screen Saver (Default: 10 minutes)
C FL Dimmer (Default: Bright)
A
B
C
OSD Language
Screen Saver
FL Dimmer
Langue Aff. é cran
Français
English
Español
Deutsch
Italiano
Screen Saver
OFF
1 minute
5 minutes
10 minutes
15 minutes
FL Dimmer
Auto
Bright
Dark
OFF
E3TK0FD_EN.book Page 70 Monday, March 9, 2009 10:00 AM