Toshiba L1433 - Manual (Page 31)

English - 30 -
English
Source Settings, Other Controls
Configuring Source Settings
You can enable or disable selected source options. The
TV will not switch to the disabled source options when the
“SOURCE”
button is pressed.
• Select Sources in the Settings menu and press
OK button.
• Press Up or Down buttons to select a source.
• Use Left or Right button to enable or disable the
selected source. Changes are automatically stored.
Input Selection
Use the Input Selection window if the television does
not switch over to a connected source automatically.
Press “
SOURCE” button on your remote control for
directly changing sources. Use the
Up or Down button
to highlight an input and press
Right button to select.
Configuring Other Settings - General
You can configure the settings of your TV. Select
Settings from main menu and press OK to view the
Settings menu. Press the MENU
button on the remote
control to exit.
To view general configuration preferences, select
Other Settings in the Settings menu and press OK
button.
Operation
• Press Up or Down button to select an item.
• Use Left or Right button to set an option or press
OK button to view a sub-menu.
Menu Timeout
To set a specific display timeout for menu screens,
set a value for this option.
In the
Other Settings menu, select Menu Timeout
and choose
15 sec, 30 sec, 60 sec or Off using Left
or
Right button.
Scan Encrypted Channels
When this setting is set as Yes
, search process will
locate the encrypted channels as well. If it is set as
No
manually, encrypted channels will not be located
while in automatic search or manual search. Scan
Encrypted Channel feature will always be Yes after
performing first time installation.
• In the
Other Settings menu, use Up or Down button
to select
Scan Encrypted.
• Press Left or Right button to set this function as
Yes or No.