Toshiba Magnia Z500 - Manual (Page 54)

Setup
Windows® 2000 Quick Installation
51
Setup Option
The Setup Option screen appears. Use this screen to specify the
setup installation features you want enabled during the installation
process.
Setup Option screen
Beep sound in case of disk change
Sounds an audible alert (beep) to change storage media (CD-
ROM and diskette).
Start installation according to parameter settings at boot time
When the Configuration Save Disk containing the configuration
information is inserted into the floppy disk drive, and SST is
started up from CD-ROM, a confirmation message is displayed,
and installation is started immediately. The currently set
configuration information is used. However, if the required
devices are not mounted, device drivers and other information will
not be installed.