Toshiba Magnia Z500 - Manual (Page 93)

HW Diagnostics
Items of HW Diagnostics
91
[12. BMC TEST]
To test the BMC functions and the LED display functions.
[01. Sensor test]
The sensor test for each controller is performed with the results
displayed.
[02. FrontPanel test]
Verifies the functions of LED. Check that:
LED Test:
Please check that the Fault LED is ORANGE. OK (Y) / FAILED (N)
Please check that the ASD LED is ORANGE. OK (Y) / FAILED (N)
Please check that the ASD LED is GREEN. OK (Y) / FAILED (N)
[13. IDE HDD TEST]
Tests the IDE HDD devices. (Even if the IDE HDD does not exist
on your computer, this test can be executed, however nothing is
tested.)
[01. Sequential address read]
This subtest is a sequential reading of all the blocks on the
HDD, starting at block 0. (TBD)
[02. Connection]
This subtest reads the logical sector at the end of the HDD, and
then recognizes if the drive is connected or not.
IDE HDD TEST (IDE)
Status Error name Meaning
01 IDE HDD TEST ERROR Failed to test the IDE HDD.