Toshiba Satellite P100 (PSPAD) - Manual (Page 84)

5-2 User’s Manual
The Keyboard
F1 ... F12 function keys
The function keys, not to be confused with Fn, are the 12 keys at the top of
your keyboard.
F1 through F12 are called function keys because they execute
programmed functions when pressed. Used in combination with the Fn key,
keys marked with icons execute specific functions on the computer. See
the section, Soft keys: Fn key combinations, in this chapter. The function
executed by individual keys depends on the software you are using.
Soft keys: Fn key combinations
The Fn (function) is unique to TOSHIBA computers and is used in
combination with other keys to form soft keys. Soft keys are key
combinations that enable, disable or configure specific features.
Hotkeys
Some software may disable or interfere with soft-key operations. Soft-key
settings are not restored by the Sleep Mode.
Fn + ESC Mute Turns the volume on and off.
Fn + F1 Lock Enters “Lock computer” mode. To restor your
desktop, you need to log on again.
Fn + F2 Power Plan Displays the power save modes and lets
you change the power settings.
Fn + F3 Sleep This hot key switches the system to Sleep Mode.
Fn + F4 Hibernate This hot key switches the system to
Hibernate mode.
Fn + F5 Output Changes the active display device.
Default resolution for simultaneous mode is set to 1024x768. If you
connect an RGB (Monitor) that is not 1024x768 resolution, change it in
“Display Properties”.
Fn + F6 Brightness (decreases) Turns the monitor brightness
down.
Fn + F7 Brightness (increases) Turns the monitor brightness
up.
Fn + F8 Wireless Switches the active wireless devices if the
wireless communication switch is switched on.