Toshiba Qosmio F30 (PQF32) - Manual (Page 66)

3-14 User’s Manual
Getting Started
Data save in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer takes a
moment to save current memory data to the hard disk. During this time, the
HDD indicator will light.
After you turn off the computer and memory is saved to the hard disk, turn
off the power to any peripheral devices.
Restarting the computer
Certain conditions require that you reset the system. For example, if:
■ You change certain computer settings.
■ An error occurs and the computer does not respond to your keyboard
commands.
There are three ways to reset the computer system:
1. Click start then click Turn off computer. From the Turn off
computer menu select Restart.
2. Press Ctrl + Alt + Del to display the Windows Task Manager, then
select Shutdown and Restart.
3. Press the power button and hold it down for five seconds. Wait 10 to
15 seconds, then turn the power on again by pressing the power button.
Restoring the preinstalled software
If preinstalled files are damaged, use the Product Recovery Media to
restore them. To restore the operating system and all preinstalled software,
follow the steps below.
Restoring the Windows operating system
1. Load the Product Recovery Media in the optional optical disc drive and
turn off the computer’s power.
2. Hold down the F12 key and turn on the power. When Qosmio appears,
release the F12 key.
3. Use the left or right cursor key to select the optical disc drive in the
Boot Devices menu. For details, refer to the Boot Priority section in
Chapter 7, HW Setup .
4. Follow the on-screen instructions.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.