Toshiba Satellite M100 (PSMA1) - Manual (Page 156)

User’s Manual B-2
Display Modes
Displaying movies on a TV or CRT
This section describes how to set up your system to display movies
simultaneously on your computer's LCD and on an external TV or CRT
monitor.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out port.
3. Turn the television on.
4. Turn the computer on.
You can use the hotkeys Fn + F5 or use the TV-Out button to change the
display device. Refer to Chapter 5, The Keyboard .
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below, based on the configuration of your
computer:
For Intel
1. Click Start Control Panel Appearance and Themes.
2. Choose Display to open the Display Properties dialog box.
Some display modes might not be supported depending on the external
monitor which you use.