When writing or rewriting – Toshiba Satellite M100 (PSMA1) User Manual

Page 83

Advertising
background image

User’s Manual

4-23

Operating Basics

In writing to a DVD-R/+R/-RW/+RW disc, some disc space is required

for file management, so you may not be able to write the full capacity of

the disc.

Since the disc is based on the DVD-R/-RW standard, it will be filled with

dummy data if the written data is less than about 1 GB. Even if you write

only a small amount of data, it might take time to fill in the dummy data.

Two types of DVD-R/+R/-RW/+RW/-RAM discs are on the market: data

and video. Use a video disc to store video data. You can use video

discs on a DVD recorder as well as on your computer's DVD-ROM

drive. You cannot use data discs on a DVD recorder.

DVD-RAM formatted by FAT32 cannot be read in Windows 2000

without DVD-RAM Driver Software.

When multiple drives that can write data to discs are connected, be

careful not to write to the wrong drive.

Be sure to connect the universal AC adapter before you write or rewrite.

Before you enter standby/hibernation mode, be sure to finish DVD-RAM

writing. Writing is finished if you can eject DVD-RAM media.

Be sure to close all other software programs except the writing

software.

Do not run software such as a screen saver, which can put a heavy load

on the CPU.

Operate the computer at full power. Do not use power-saving features.

Do not write while virus check software is running. Wait for it to finish,

then disable virus detection programs including any software that

checks files automatically in the background.

Do not use hard disk utilities, including those intended to enhance hard

disk access speed, as they may cause unstable operation and damage

data.

Write from the computer's hard disk drive to the CD. Do not try to write

from shared devices such as a LAN server or any other network device.

Writing with software other than Sonic RecordNow! or InterVideo

WinDVD Creator 2 Platinum has not been confirmed. Therefore,

operation with other software cannot be guaranteed.

When writing or rewriting

Please observe/consider the following when you write or rewrite to a CD-R/

RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.

Do not perform any of the following actions when writing or rewriting:

Change users in the Windows XP operating system.

Operate the computer for any other function, including using a

mouse or TouchPad or closing/opening the LCD panel.

Start a communication application such as a modem.

Apply impact or vibration to the computer.

Install, remove or connect external devices such as PC card, USB

devices, an external display, i.Link devices or optical digital devices.

Advertising
This manual is related to the following products: