Toshiba Magnia 3310 - Manual (Page 105)

Hardware Diagnostics
Items of Hardware Diagnostics
101
CACHE MEMORY TEST (CAH) Error log
[09. SCSI TEST]
To test the SCSI devices.
Before running the test, you must set the parameters. If "HOST ID
NUMBER" is set to "ALL", "SCSI ID NUMBER" and
"CHANNEL NUMBER" are ignored. (Even if the SCSI device
does not exist on your computer, this test can be executed,
however nothing is tested.)
[01. INQUIRY]
This subtest issues the INQUIRY command to the SCSI bus and
displays result messages returned from the devices on the SCSI
bus. After specifying a valid host and channel number, the
INQUIRY command is sent to the target SCSI bus. The results
from the devices ID0 to ID15 are displayed.
CHAN
Indicates the ASPI Channel ID and host adapter.
HOST
The channel number in the target host adapter.
ID00, 01, 02 …
The SCSI ID number in the target host adapter.
Status Error name Meaning
01 MEMORY PARITY ERROR Memory parity error
02 PROTECT MODE ERROR The shift to the protected mode failed
03 CACHING ERROR An error occurred on the cache system
FF DATA COMPARE ERROR Data comparing error