Toshiba Magnia 3310 - Manual (Page 49)

Setup
Windows 2000 Quick Installation
45
On-board 100Mbps LAN Adapter (Ether2)
This adapter is compatible with 100BASE -TX/10 BASE-T
Ethernet LAN.
NOTE: The [Onboard 1Gbps LAN Adapter (Ether1)] option is
always selected.
NOTE: The LAN driver for onboard LAN adapter (Ether2)
must be installed regardless of the setting of this screen. If the
[Onboard 100Mbps LAN Adapter (Ether2)] option is not
selected, onboard LAN adapter (Ether2) will be set up using
the default setting of Windows 2000.
Network Protocol Setting -1
After specifying the LAN Adapter, the Network Protocol Setting -
1 screen appears. Use this screen to specify the network
communication protocol for the On-board 1Gbps LAN Adapter
(Ether1).
Network Protocol Setting -1 screen