Toshiba Magnia 3310 User Manual
Page 27
Setup
Windows Server 2003 Quick Installation
23
TCP/IP Protocol Settings -1
After specifying the LAN Adapter, the TCP/IP Protocol Settings -
1 screen appears. The TCP/IP Protocol Settings -1 screen allows
you to specify the IP Address, Subnet Mask, and Default Gateway
Address for On-board 1Gbps LAN Adapter (Ether1).
TCP/IP Protocol Settings -1 screen
To have a DHCP server automatically assign the IP addresses,
Subnet Masks and Default Gateway for On-board 1Gbps LAN
Adapter (Ether1), select "Assign an IP Address from DHCP
Server".
Otherwise, do not select "Assign an IP Address from DHCP
Server" and specify manually the IP address, Subnet Mask, and
Default Gateway Address.
NOTE: For IP Address, Subnet Mask and Default Gateway
Address, you must use decimal numbers (from 0 to 255).