Toshiba Tecra M4 - Manual (Page 67)

TECRA M4 3-11
Getting Started
2. Slide and hold the computer’s power button toward the right.
Turning on the power
Starting up for the first time
When you first turn on the power, the computer’s initial screen is the
Microsoft Windows XP Startup Screen Logo. Follow the on-screen
directions for each screen. During setup, you can click the Back button to
return to the previous screen.
Be sure to read the Windows End User License Agreement display
carefully.
Turning off the power
The power can be turned off in one of the following modes: Shut down
(Boot), Hibernation or Standby mode.
Shut Down mode (Boot mode)
When you turn off the power in Shut Down mode no data is saved and the
computer will boot to the operating system’s main screen.
1. If you have entered data, save it to the hard disk or to a floppy disk.
2. Make sure all disk (disc) activity has stopped, then remove the CD/
DVDs or floppy disk.
Power button
■ Be sure to read the License Agreement carefully.
■ During Windows setup, the on-screen keyboard is shown on top of the
input screen and it may not be easy to see the input content. In such
cases, move the on-screen keyboard on the screen to an area which
does not obstruct the view so that the input screen can be seen.
Confirm that the content is correct before continuing setup.