Toshiba Tecra M7 - Manual (Page 147)

User’s Manual 6-3
Power and Power-Up Modes
Power conditions continued
* 1 When the Slice Expansion battery is not charging.
*
2
When the main battery is not charging.
* 3 For the computer to shut down in hibernation mode, the hibernation
feature must be enabled in two places in TOSHIBA Power Saver: the
Hibernate window and the Battery Alarm item of the Alarm window. If a
main battery and a Slice Expansion battery are installed, the computer
does not shut down until the charge in both batteries is exhausted.
*
4
When no Slice Expansion battery is installed.
* 5 When no main battery is installed.
Power on Power off (no operation)
AC adaptor
not
connected
2nd battery
charge is above
low battery
trigger point
• Operates
• LED: 2nd battery off
DC IN off
2nd battery
charge is below
low battery
trigger point
• Operates
• LED: 2nd battery
flashes orange
DC IN off
2nd battery
charge is
exhausted
Computer shuts down *
3
No 2nd battery
is installed
• No operation *
5
• LED: 2nd battery off
DC IN off
When batteries are charged, the main battery is charged first. When it is
fully charged, the Slice Expansion battery is charged.