Toshiba Tecra M7 - Manual (Page 73)

User’s Manual 3-23
Features, Utilities and Options
7. Remove two screws securing the keyboard.
8. Open the latch which holds the keyboard in place, then lift the back of
the keyboard toward you, and lay it face down on the palm rest.
Removing two screws and rotate the keyboard
9. Remove the two screws and take off the memory module cover.
Removing the memory module cover
Use a point size 1 Phillips screwdriver.
■ When you move the keyboard forward, do not touch the keys. Doing so
could cause misalignment. Hold the keyboard by the sides and lay it
gently on the palm rest.
■ The keyboard is connected to the computer by a keyboard ribbon
cable. Be careful not to apply tension to this cable when you lift up the
keyboard. Do not try to disconnect this cable.
Screws
Screws
Memory module cover
■ Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
■ The memory module cover will be hot after using the computer for long
periods of time. Exercise caution when removing.