Battery pack, Battery pack -26 – Toshiba Tecra M7 User Manual

Page 76

Advertising
background image

3-26

User’s Manual

Features, Utilities and Options

3. Turn the computer upside down and remove the battery pack. Refer to

Replacing the battery pack

section in Chapter 6,

Power and Power-Up

Modes

, for details.

4. Follow steps 4 through 9 in Installing memory module to remove the

memory module cover.

5. Push the latches to the outside to release the memory module. A spring

will force one end of the memory module up.

6. Grasp the sides of the module and pull it out.

Removing the memory module

7. Rotate the keyboard back into place and secure the keyboard brace as

described in the previous section.

8. Install the battery pack. Refer to

Replacing the battery pack

section in

Chapter 6,

Power and Power-Up Modes

, for details.

9. Turn your computer over.

Battery Pack

You can increase the portability of the computer with additional battery

packs. If you’re away from an AC power source and your battery runs low,

you can replace it with a freshly charged battery. Refer to Chapter 6,

Power

and Power-Up Modes

.

If you use the computer for a long time, the memory modules and the

circuits locating close to the memory modules will become hot. In this

case, let them cool to room temperature before you replace them. Or

you will get burnt if you touch any of them.

Do not touch the connectors on the memory module or on the

computer. Debris on the connectors may cause memory access

problems.

Latches

Advertising