Toshiba AT300 - Manual (Page 22)

Figure 3-3 Connecting the AC adaptor 1
2-pin
3-pin
2. Plug the power connector of the power cable into the docking interface
on your tablet.
Figure 3-4 Connecting the AC adaptor 2
3. Plug the AC adaptor into a live wall outlet.
You can charge the tablet by connecting the power cable to a USB port on
a computer. However it is not recommended because it takes much longer
time to fully charge the battery.
Turning on the power
This section describes how to power up your tablet.
Press & hold Power button to turn on the tablet. The tablet will vibrate to
indicate the status.
Figure 3-5 Turn on the tablet
User's Manual 3-9