Toshiba AT300 - Manual (Page 76)

Inspect all connecting cables for loose wires and all connectors for
loose pins.
Always try to make detailed notes of your observations and keep them in a
permanent error log - this will help you to describe your problems to
TOSHIBA Support. In addition, if a problem recurs, the log you have made
will help to identify the problem faster.
Hardware and system checklist
This section discusses problems caused by your tablet’s hardware or
attached peripherals. Basic problems may occur in the following areas:
Internal display panel
Memory Media Card
Wireless LAN
Sound system External monitor
USB device
Bluetooth
Internal display panel
Apparent tablet's display panel problems may be related to the tablet's
setup and configuration.
Problem Procedure
Problems above
remain unresolved
or other problems
occur You should initially refer to the documentation
supplied to you with the software to understand the
cause of the problems.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Memory Card
Problem Procedure
Memory media card
error occurs Remove the memory media card from the tablet
and then reinsert it in order to ensure it is firmly
connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
You cannot write to
a memory media
card Remove the memory media card from the tablet
and ensure that it is not write protected.
User's Manual 8-2