Bissell PROHEAT PRO-TECH 7920 - Manual (Page 11)

B issell PowerSteamer® ProHeat™ Series Service Center Repair Guide
Printed February, 2001
1/30/2004 (Revision 1) 10
5.
Remove the four screws on the motor cover.
6.
Rock the motor duct out of position.
7.
Lift out the motor.
8. Disconnect all wires.
9.
Remove, clean and save the two gaskets on the motor.
10.
Clean any debris from motor cover top and bottom area.
11.
Attach larger gasket to the new motor.
12.
Attach the green groundwire to the copper terminal located on the bottom of the motor
stack.