Bissell PROHEAT PRO-TECH 7920 - Manual (Page 17)

B issell PowerSteamer® ProHeat™ Series Service Center Repair Guide
Printed February, 2001
1/30/2004 (Revision 1) 16
8.
Place stretch belt on new pump.
9.
Re-seat new pump into position and screw into place (4 screws).
10. Reattach
tubing
11.
Reattach brush, cogbelt, and retainer arm.
12.
Screw orange retaining collar back in place.
13.
Reset spray tips.
14.
Put solution tanks in place
15.
Test pump operation by plugging in unit and depressing the trigger mechanism.