Billion Electric Company 800VGT - Manual (Page 114)

Billion 800VGT Router
Special Dial Codes
The following table lists the special dial codes that are built into the router. Note that Telkom’s VoIP
service may provide the same type of features, and therefore these features might be disabled on the
800VGT platform.
Option Description
Flash-hook
Switch to PSTN line
Note: This is a quick press of the hook switch. On most phones, a
button is provided which provides Flash-hook functionality. The
button is marked "FLASH","RECALL" or sometimes “R”
*69
Return the last missed call (for SIP service only)
Note: Entering this on a phone will call the last number that dialled
the phone. For example A makes a call to B, but hangs up before
B answers. If B enters *69, A will be called back .
## Last dialled number redial function
*20
Turn the Do Not Disturb mode on
This mode enables a “Do Not Disturb” feature on a phone, such
that any phone which calls it will receive an engaged tone and the
called phone will not ring. For example, B enters *20 and hangs
up. A makes a call to B, but receives the engaged tone. Phone B
does not ring.
*80 Set the Do Not Disturb mode off
*74<x><number>#
Set the number for Speed dial code ‘x’, where ‘x’ is a number
between 2 and 9.
Note: <x> is a number between 2 and 9, and <number> is the
number to dial. To dial a speed dial number from a phone
connected to the VoIP Router , dial :
<x>#, where <x> is a number between 2 and 9.
These settings will affect your setting on the Speed Dial page of
the WEB GUI.
*90<phone-number>
This is how to make a Blind Call Transfer. With this function, the
specified <phone-number> is the number that you wish to transfer
the call to. This function is for a SIP service only.
Note: You use Blind Call Transfer when you have a call in
progress (incoming or outgoing) and decide you wish to transfer
the call to another phone. To transfer the call, perform the following
steps:
1. Hook-flash to get a dial tone.
2. Dial *90<phone-number> (e.g. *907401). After hearing the
confirmation tone, you can hang up. The transferred call will hear a
ringback tone, and the third-party phone (the one that the call has
been forwarded to)_will be rung. When the third-party phone is
picked up, the transferred call will be connected.
If the third-party phone does not answer, the caller being
transferred must hang up to cancel the connect attempt.
114
Chapter 4: Configuration