Billion Electric Company 800VGT - Manual (Page 17)

Billion 800VGT Router
Factory Default Settings
Before configuring your router, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
The default username and password are “admin” and “admin” respectively.
If you ever forget the username/password to login to the router, you may
press the RESET button for more than 6 seconds to restore the factory
default settings.
Device LAN IP settings
IP Address: 10.0.0.2
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE Multisession (the router has the ability to accommodate multiple PPPoE sessions on the
same PVC in factory default state.
DHCP server
DHCP server is enabled.
Start IP Address:10.0.0.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.
LAN Port WAN Port
IP address 10.0.0.2
Subnet Mask 255.255.255.0
DHCP server function Enabled
IP addresses for
distribution to PCs 100 IP addresses continuing from
10.0.0.100 through 10.0.0.199
The WAN protocol has been
pre-selected
and set by
Telkom for automated service
deployment and delivery.
17
Chapter 3: Basic Installation