Billion Electric Company 800VGT - Manual (Page 62)

Billion 800VGT Router
Configuring Packet Filter:
1. Click Port Filters. You will then be presented with the predefined port filter rules screen (in this case,
for the low security level) shown below:
Note: You may edit the predefined rule instead of deleting it. This is an example showing to how you add a
filter on your own.
Click Delete
2. Click Delete to delete the existing HTTP rule.
3. Click Add TCP/UDP Filter.
Click Add TCP/UDP Filter
4. Input the Rule Name, Time Schedule, Source/Destination IP, Type, Source/Destination Port,
Inbound and Outbound.
Example
:
Application: WEB_HTTP
Time Schedule: Always On
Source / Destination IP Address(es): 0.0.0.0
(Allow all addresses)
Type: TCP (Please refer to Table1: Predefined Port Filter)
Source Port: 0-65535
(I allow all ports to connect with the application))
Destination Port: 80-80 (Internal port defined for HTTP)
Inbound / Outbound: Allow
62
Chapter 4: Configuration