Video sharing, Share a video, Receive a video sharing invitation – Nokia E90 Communicator User Manual

Page 54: Net calls, Create a net call profile

Advertising
background image

To disable the sending of audio, video, or video and audio, select

Options

>

Disable

>

Sending audio

,

Sending video

, or

Sending

aud. & video

.

To use the loudspeaker for receiving audio, select

Options

>

Activate loudspeaker

. To mute the loudspeaker and use the

earpiece, select

Options

>

Activate handset

.

To swap the places of images, select

Options

>

Change image order

.

To zoom the image on the display, select

Options

>

Zoom in

or

Zoom out

.

To end the video call and make a new voice call to the same recipient, select

Options

>

Switch to voice call

.

Video sharing

To share videos (network service) during a voice call, you need to configure the session initiation protocol settings at >

Tools

>

Settings

>

Connection

>

SIP settings

. Contact your service provider for the correct settings.

You also need to set the network mode to

UMTS

at >

Tools

>

Settings

>

Phone

>

Network

.

Share a video

1. Make a phone call to the selected recipient. The recipient needs to have a compatible phone. You can start sharing a video

once the phone call is established and your device has been registered to the SIP server.

2. To send live video or a video clip from your device, select

Options

>

Share video

>

Live video

or

Recorded clip

. To preview

the clip, select

Options

>

Play

.

3. Select the recipient from Contacts, or enter the recipient's phone number or SIP address manually to send an invitation to

the recipient. Sharing begins automatically when the recipient accepts the video sharing.

4. To end sharing the video, select

Stop

. The voice call continues normally.

Receive a video sharing invitation

When you receive a video sharing invitation, a message is displayed showing the caller’s name or SIP address.
To accept the invitation and begin the sharing session, select

Accept

.

To reject the invitation, select

Reject

. The voice call continues normally.

Net calls

Your device supports voice calls over the internet (net calls). Your device attempts emergency calls primarily over cellular

networks. If an emergency call using cellular networks is not successful, your device attempts an emergency call through your

net call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency calls, if

possible. If you have cellular network coverage available, make sure that your cellular phone is switched on and ready to make

calls before you attempt an emergency call. The capability for an emergency call using internet telephony depends on the

availability of a WLAN network and your net call provider's implementation of emergency call capabilities. Contact your net call

provider to check the internet telephony emergency call capability.
Select >

Connectivity

>

Internet tel.

.

With the net call service (network service), you can make and receive calls over the internet using the VoIP (voice over internet

protocol) technology. Net calls can be established between computers, between mobile phones, and between a VoIP device and

a traditional telephone. To make or receive a net call, your device must be within WLAN coverage, for example.
The availability of the net call service may vary according to your country or area.

Create a net call profile

Before you can make net calls, you need to create a net call profile.
1. Select >

Tools

>

Settings

>

Connection

>

SIP settings

>

Options

>

Add new

, and enter the required information.

Ensure that

Registration

is set to

Always on

. Contact your net call provider for the correct settings.

2. Select

Proxy server

>

Transport type

>

Auto

.

3. Select

Back

until you return to the

Connection

settings main view.

4. Select

Internet tel.

>

Options

>

New profile

. Enter a name for the profile, and select the SIP profile you just created.

To set the created profile to be used when connecting to the net call service automatically, select >

Connectivity

>

Internet

tel.

>

Preferred profile

.

To login to the net call service manually, select

Registration

>

When needed

, and

Transport type

>

UDP

or

TCP

in the SIP settings

when creating a net call profile.

T e l e p h o n e

© 2007 Nokia. All rights reserved.

22

Advertising