Nokia E90 Communicator - Manual (Page 96)

To move the image to another folder, select Options > Organise > Move to folder . Scroll to the folder to which you want to
move the image, and select Move .
Radio
Select > Media > Radio .
With the radio, you can search for radio channels, listen to them, and save them on your device. You can leave the radio open
in the background while using the device for other purposes. The wired headset works as an antenna, so always connect the
headset when using the radio, even if you listen to it through the loudspeaker. When you make or receive a phone call, the
radio stops playing, and resumes when you end the call. You cannot listen to the radio when the device is in the Offline profile.
To tune channels automatically, select the or button.
To tune channels manually, select
Options > Manual tuning , and enter the frequency.
To save the found channel, select Options > Save station . Select the position for the channel in the list. The position corresponds
to the number keys on the keypad. A short press of a number key opens the radio channel saved in that position. If you have a
channel saved to position 10 or higher, first press 1 and then the second digit.
To listen to the next available channel, select the button. To listen to the previous channel, select the button. You can also
go from channel to channel by pressing the answer button in your headset.
To adjust the volume, scroll left or right.
To switch from headset use to loudspeaker, select
Options > Activate loudspeaker . To switch back to headset use, select
Options > Deactivate loudspeaker .
To set the radio to play in the background while you are using your device for other purposes, select Options > Play in
background .
To switch the radio off, select Exit .
3-D ringing tones
Select > Media > 3-D ringing tones .
To enable three-dimensional sound effects for ringing tones, select 3-D ringing tone effects > On . Not all ringing tones support
3–D effects.
To change the 3–D effect that is applied to the ringing tone, select
Sound trajectory and the desired effect.
To modify the 3–D effect, select from the following:
•
Trajectory speed — Select the speed at which sound moves from one direction to another. This setting is not available for
all effects.
• Reverberation — To adjust the amount of echo, select the desired effect in the list.
• Doppler effect — Select On to have the ringing tone sound higher when you are closer to your device, and lower when you
are farther away. This setting is not available for all effects.
To listen to the ringing tone with the 3–D effect applied, select Options > Play tone .
To adjust the volume of the ringing tone, select > Tools > Profiles > Options > Personalise > Ringing volume .
M e d i a a p p l i c a t i o n s
© 2007 Nokia. All rights reserved. 64