After recording a video, Camera settings, See "after recording a – Nokia N95 User Manual

Page 52: Video", p. 52, Ca mera

Advertising
background image

2.

To start recording, press the capture key. The red

record icon ( ) is shown and a tone sounds,

indicating that recording has started.

3.

To pause recording at any time, press

Pause

. Video

recording automatically stops if recording is set to

pause and there are no keypresses within a minute.

Select

Continue

to resume recording.

To zoom in or out of the subject, use the zoom key

in your device.

4.

To stop recording, select

Stop

. The video clip is

automatically saved to the

Images & videos

folder

of Gallery. The maximum length of the video clip

depends on the available memory.

To activate the front camera, select

Options

>

Use

secondary camera

. To start recording a video, press

the scroll key. To zoom in or out, scroll up or down.

After recording a video

After you record a video clip, select the following from

the active toolbar (available only if

Show captured

video

is set to

On

in the video settings):

To immediately play the video clip you just recorded,

select

Play

( ).

If you do not want to keep the video, select

Delete

( ).

To send the video clip using a multimedia message,

e-mail, or other connection methods, such as

Bluetooth connectivity, press the call key, or select

Send

( ).

See "Write and send messages", p. 72.

See "Send data using Bluetooth

connectivity", p. 30.

This option is not available

during an active call. You may not be able to send

video clips saved in the .mp4 file format in a

multimedia message.
You can also send the video clip to a call recipient

during an active call. Select

Send to caller

( ) (only

available during an active call).

To upload the video clip to a compatible online

album, select (only available if you have set up

an account for a compatible online album).

See

"Share images and videos online", p. 59.

To return to the viewfinder to record a new video

clip, press the capture key.

Camera settings

There are two kinds of settings for the camera: setup

settings and main settings. The setup settings return

to the default settings after you close the camera, but

the main settings remain the same until you change

them again. To adjust the setup settings, use the

options in the active toolbar.

See "Setup settings—

adjust colour and lighting", p. 53.

To change the main

settings, in the image or video mode, select

Options

>

Settings

.

52

Ca

mera

Advertising
This manual is related to the following products: