Nokia N95 - Manual (Page 98)

call after an unsuccessful call attempt. To stop
automatic redialling, press the end key.
● Show call duration — Activate this setting if you
want the length of a call to be displayed during the
call.
● Speed dial — Select On , and the numbers assigned
to the number keys (2 to 9) can be dialled by
pressing and holding the key.
● Anykey answer — Select On , and you can answer
an incoming call by briefly pressing any keypad key,
except the left and right selection keys, the power
key, and the end key.
● Line in use — This setting (network service) is
shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which
phone line you want to use for making calls and
sending text messages. Calls on both lines can be
answered irrespective of the selected line. If you
select Line 2 and have not subscribed to this
network service, you are not able to make calls.
When line 2 is selected, is shown in the standby
mode.
Tip: To switch between the phone lines, press
and hold # in the standby mode.
● Line change — To prevent line selection (network
service), select Disable if supported by your SIM
card. To change this setting, you need the PIN2 code.
Call divert
Press , and select Tools > Settings > Phone >
Call divert .
Call divert allows you to divert your incoming calls to
your voice mailbox or another phone number. For
details, contact your service provider.
Select which calls you want to divert and the desired
diverting option. Set the option on ( Activate ) or off
( Cancel ), or check whether the option is activated
( Check status ).
Several diverting options can be active at the same
time. When all calls are diverted, is shown in the
standby mode.
Call barring and call diverting cannot be active at the
same time.
Network settings
Press , and select Tools > Settings > Phone >
Network .
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with .
● Network mode — Select which network to use. If
you select Dual mode , the device uses the GSM or
UMTS network automatically, according to the
network parameters and the roaming agreements
98
Se
ttings