Nokia Wireless Clip-on Headset HS-21W - Manual (Page 10)

T h e A D - 5 B w i r e l e s s a u d i o a d a p t e r
10
If the keylock of your phone is on, the keylock is
automatically deactivated after you plug the
adapter into the phone. If you have the silent
profile on, automatic answering does not work.
The lights-off mode should be activated,
because having the lights continuously on
reduces the battery life.
Pair the device
Switch on the headset before you pair your headset with the adapter. Make sure no
other headsets or other compatible audio devices are active within a 32 feet
(10 meter) range.
1. Plug the adapter into the Pop-Port connector of your phone. Your phone should
be ready to use, in the standby mode, and it should not have any characters
keyed in. The adapter blinks green once to indicate that the power is on. If the
adapter has not been paired with any headsets, it slowly and continuously
blinks red. Wait for the slow red blink.
2. Press the adapter control key once.
3. If a compatible headset is found, the light indicator of the adapter is
continuously green for 20 seconds. Key in your four-digit Bluetooth passkey on
the phone to pair the headset within this 20 seconds. The digits appear on the
phone display. To end your passkey entry, press .
4. If the pairing is successful, the phone display is cleared. The light indicator on
the adapter is turned off, and appears on the phone display.
The headset becomes the default device for the adapter.
5. The adapter and the headset are ready to be used.