Nokia Wireless Clip-on Headset HS-21W - Manual (Page 19)

T h e H S - 2 1 W w i r e l e s s c l i p - o n h e a d s e t
19
To switch off, press and hold the power key for 2 seconds. The headset beeps and
the red indicator light is displayed briefly.
■ Pair the headset with a compatible phone
1. Switch on the phone.
2. Switch on the headset.
3. Enter the Bluetooth menu of your phone and make sure that the Bluetooth
feature is activated.
4. Enter the submenu where you can set the phone to search for Bluetooth
devices, and start the search.
5. Select the headset from the list.
6. Enter the passcode 0000 to pair (associate) and connect the headset to your
phone.
Your phone becomes the default phone for the headset, if the headset has not
been previously paired with another phone. See "Use the headset with several
phones," page 24 .
The headset beeps and appears in the phone menu where you can view the
Bluetooth devices that are currently paired with your phone.
7. Start using the headset. See "Use the headset," page 22.
Disconnect the headset from the phone
You can disconnect the headset from your phone when you want to connect
another device with your phone using the Bluetooth wireless technology.
The headset can be disconnected in any of the following ways: