Charge the battery, Switch the phone on and off, Set the time, time zone, and date – Nokia 5610 XpressMusic User Manual

Page 13: Configuration settings service

Advertising
background image

12

Charge the battery

Charging the BP-5M battery with the AC-4 charger takes approximately 1 hour and 30 minutes
while the phone is in the standby mode.

1. Connect the charger to a wall outlet.

2. Connect the lead from the charger to the

charger connector at the top of your phone.

If the battery is completely discharged, it may
take a few minutes before the charging indicator
appears on the display or before any calls can
be made.

Switch the phone on and off

1. Press and hold the power key, as shown.

2. If the phone asks for a PIN code, enter the code

(for example, displayed as ****), and select OK.

When you switch on your phone for the first time, and the phone is in
the standby mode, you are asked to get the configuration settings from
your service provider (network service). Confirm or decline the query.
See “Configuration,” p. 46, and “Configuration settings service,” p. 12.

Set the time, time zone, and date

When you switch on your phone for the first time, and the phone is in the standby mode, you
are asked to set the time and date. Fill in the fields, and select Save.

To change the time, time zone, or date settings, or to set the time to be updated automatically
(network service), select Menu > Settings > Date and time and from the available options.

Configuration settings service

To use some of the network services, such as mobile internet services, MMS, Nokia Xpress
audio messaging, or remote internet server synchronization, your phone needs the correct
configuration settings. For more information on availability, contact your service provider,
or nearest authorized Nokia dealer, or visit the support area on the Nokia website,
www.nokia.com/support.

When you have received the settings as a configuration message, and the settings are
not automatically saved and activated, Configuration settings received is displayed.
Select Show > Save. If required, enter the PIN code supplied by the service provider.

Advertising