Nokia 9290 - Manual (Page 140)

122
Contacts
Store touch tones
Touch tones are the tones you hear when you press the number keys on the phone
keypad. Touch tones allow you to communicate with voice mailboxes, computerized
telephony systems, etc.
You can store a sequence of touch tones for a contact card. When you make a
call to the contact, you can retrieve the sequence. It will save you from re-entering
the characters.
1 Open or create a contact card.
2 Press Add field. A list opens.
3 Scroll down the list to Touch tones and press Select. The touch tone field is
inserted in the contact card.
4 Enter a touch tone sequence in the touch tone field.
If you need a phone number-touch tone combination number for a contact, store
the phone number followed by the touch tone sequence in the Tel field. You can
use the following non-numeric characters:
Character Function
*#
The asterisk and hash symbols may be used if the touch tone service requires
them
p Inserts a pause of approx. 2 seconds before, or between, touch tone characters
w
If you use this character, the remaining sequence is not sent until you press
Send tone again during the call.