Nokia 9290 - Manual (Page 89)

71
General information
3. General information
This chapter explains how the communicator operates and how to supply power to
the communicator. For information on first start-up and setup of your communicator,
see the Getting Started chapter in this user guide.
Communicator display
Figure 16
The communicator interface is turned on by opening the cover. The application
that was active the last time the communicator was used is shown on the display.
When you close the cover, the communicator interface turns off its display and
saves all data.
Tip: When a command is
dimmed, it cannot be used.
The commands always correspond to the command buttons, as shown in Figure 17.
Scroll bar
Commands
Command buttons
Search field Indicator area
Name and icon of application
Menu bar