Nokia 9290 - Manual (Page 274)

256
Accessories guide
Connect to a PC
To connect to a compatible PC, either use the RS-232 Adapter Cable DLR-2L,
as follows:
1 Plug the adapter cable into the connector at the back of the stand.
2 Connect the other end of the cable to the PC.
3 Place the communicator in the stand, connector end first.
4 On the PC, start either the PC Suite for Nokia 9290 Communicator program, or
the Fax/Modem application.
Alternatively, use an infrared connection, as follows:
1 Check that infrared is activated in the communicator and on the PC.
2 Place the communicator in the stand, connector end first.
3 Place the infrared port on the stand in line with the infrared port on the PC. The
distance between the two ports should be a maximum of 30 cm (11.81 inches).
4 On the PC, start either the PC Suite for Nokia 9290 Communicator program, or
the Fax/Modem application.
You can also synchronize data between your communicator and an organizer
program on a compatible PC with a single press of the
button. For more
information, see the PC Suite Guide in the Using Nokia 9290 Communicator
section of the sales package CD-ROM.