Brother HL-1850 - Manual (Page 37)

33
EXAMPLE
You can choose from nine different character styles to apply to your text.
☞
Characters printed using the smaller sizes may be difficult to read if certain style settings
(e.g., I+SHAD) are selected.
The following style settings are available:
NORMAL, BOLD, OUTLINE, SHADOW, ITALIC, I+BOLD (italic & bold), I+OUTL (italic
& outline), I+SHAD (italic & shadow), VERT (vertical)
The default style setting is NORMAL. The style indicator at the bottom right of the display
shows the current style setting when any setting other than NORMAL is selected.
Refer to Reference at the end of this section for samples of the available settings.
To change the style setting:
1 Rotate + until 04/18 STYLE is displayed, and then press + to display the current
style setting.
2 Rotate + until the desired style setting is displayed, and then press + to apply it to
the text.
OR
1
While holding down c, press 4 once, and keep c held down to display the
current style setting.
To select the ON wide setting:
1 While holding down c , press 3 once,
and keep c held down.
2 While still holding down c , continue pressing
3 until ON is displayed.
3 Release c .
O F F
W I D E
O N
W I D E
STYLE FUNCTION