Brother HL-1850 - Manual (Page 7)

3
● Use only Brother TZ tapes with this machine. Do not use tapes that do not have the
mark.
● Do not pull on the tape being fed from the P-touch. This may damage the tape cassette.
● Do not use the machine in dusty places, and keep it out of both direct sunlight and rain.
● Do not expose the machine to high temperatures or high humidity. Never leave it on the
dashboard or in the back of your car.
● Do not leave any rubber or vinyl on the machine for an extended period of time. Doing
so may cause staining.
● Do not clean the machine with alcohol or other organic solvents. Use a soft, dry cloth
only.
● Do not put any foreign objects into or anything on the machine.
● To avoid injuries, do not touch the cutter’s edge.
● Use only the AC adaptor (model H or J) designed exclusively for this machine. Use of any
other adaptor may void the warranty.
● Do not try to disassemble the AC adaptor.
● When the machine is not being used for a long period of time and it is not necessary to
keep the text files stored in the memory, disconnect the AC adaptor, and remove the bat-
teries to prevent them from leaking and damaging the machine.
● When the AC adaptor is connected, unplugging the adaptor from the electrical outlet
before unplugging it from the machine can delete all text files in the memory, even if bat-
teries are installed.
• Use six AA alkaline batteries in this machine.
This portable machine can be used anywhere by installing six (6) AA alkaline batteries . When
you change the batteries, always replace all six at the same time.
To change the batteries:
1 Remove the battery compartment cover on the back of the machine.
2 If batteries are already installed, remove them.
3 Insert six new AA alkaline batteries, making sure that their poles point in the correct
direction.
4 Attach the battery compartment cover.
GENERAL PRECAUTIONS
BATTERIES