Belkin F5D7632UK4 - Manual (Page 20)

19 18
Manually Configuring your Router
19 18
Changing LAN Settings
All settings for the internal LAN setup of the Router can be viewed
and changed here.
LAN Settings
IP Address
The “IP address” is the internal IP address of the Router. The default
IP address is “192.168.2.1”. To access the advanced setup interface,
type this IP address into the address bar of your browser. This address
can be changed if needed. To change the IP address, type in the new
IP address and click “Apply Changes”. The IP address you choose
should be a non-routable IP. Examples of a non-routable IP are:
192.168.x.x (where x is anything between 0 and 255)
10.x.x.x (where x is anything between 0 and 255)
Subnet Mask
There is no need to change the subnet mask. This is a unique,
advanced feature of your Belkin Router.